# How to create plane of Bounding Box

**URL:** <https://community.tetra4d.com/t/how-to-create-plane-of-bounding-box/195>\
**Category:** Tetra4D Reviewer\
**Created:** [June 26, 2019, 5:49am UTC](https://community.tetra4d.com/t/how-to-create-plane-of-bounding-box/195 "2019-06-26T05:49:28Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![pkhiro](https://avatars.discourse-cdn.com/v4/letter/p/8baadc/32.png) [@pkhiro](https://community.tetra4d.com/u/pkhiro)\
**Post date:** [June 26, 2019, 5:49am UTC](https://community.tetra4d.com/t/how-to-create-plane-of-bounding-box/195/1 "2019-06-26T05:49:28Z")

</div>

Hello.  
I’d like to know how to create plane of Bounding Box as picture below.  
Is there any way to create plane in 3D Reviewer(Tetra4 D Reviewer)?

 ![pic](https://us1.discourse-cdn.com/flex019/uploads/tetra4d/original/1X/c0e9569655d1642739bce142f1eabe724341d3d1.png)

---

<div class="post-metadata">

**Author:** ![jehronimo](https://sea1.discourse-cdn.com/flex019/user_avatar/community.tetra4d.com/jehronimo/32/42_2.png) [@jehronimo](https://community.tetra4d.com/u/jehronimo)\
**Post date:** [June 26, 2019, 2:06pm UTC](https://community.tetra4d.com/t/how-to-create-plane-of-bounding-box/195/2 "2019-06-26T14:06:24Z")

</div>

hum…not easy, as Tetra4D Reviewer doesn’t include a modeler kernel…here are some “tricks”:

In the **Design Review** area, you can create a **Bounding box**. Run the tool, select the part, click the mode for the creation (3 icons in the top) and the bounding box is created, oriented according the main CS. Close the _Bounding box_\* tool.

Once done, same menu, run the **Create Entities** tool, and select Create Coordinate System. Generaly, I select the mode **2 Edges** to create a CS on 2 axis, apply and close, then right click on the CS, to set it as the **Main CS** …

Well, you don’t have a “real” plane, but a CS with an orientation, that could be used for section, for instance…

jehronimo

---

<div class="post-metadata">

**Author:** ![pkhiro](https://avatars.discourse-cdn.com/v4/letter/p/8baadc/32.png) [@pkhiro](https://community.tetra4d.com/u/pkhiro)\
**Post date:** [June 26, 2019, 11:09pm UTC](https://community.tetra4d.com/t/how-to-create-plane-of-bounding-box/195/3 "2019-06-26T23:09:04Z")

</div>

Dear jehronimo-san

Hello.  
Thank you for reply always.  
I understood about it.  
Thanks a lot!!

Best regards.

---

<div class="post-metadata">

**Author:** ![jehronimo](https://sea1.discourse-cdn.com/flex019/user_avatar/community.tetra4d.com/jehronimo/32/42_2.png) [@jehronimo](https://community.tetra4d.com/u/jehronimo)\
**Post date:** [June 27, 2019, 2:15pm UTC](https://community.tetra4d.com/t/how-to-create-plane-of-bounding-box/195/4 "2019-06-27T14:15:45Z")

</div>

Thank you for the feedback! 👍🏽